Olej Technosynthese® specjalnie opracowany do obciążonych silników benzynowych i Diesla, z turbodoładowaniem lub wolnossących, wielozaworowych, gaźnikowych lub z wtryskiem paliwa, z katalizatorem lub bez. Odpowiedni do wszystkich rodzajów paliwa: benzyna ołowiowa, benzyna bezołowiowa, olej napędowy oraz gaz LPG.

The ACEA B4 performance requires an outstanding detergent/dispersant power and a better viscosity increase resistance due to soot produced by Direct Injection Diesel engines (except VAG (VW, Audi, Skoda and Seat) unit injector pump engines that require MOTUL SPECIFIC 505 01 505 00 5W-40).

The standard API SN is more stringent than API SM in terms of ageing resistance (average drain interval increased), requires anti-oxidation properties that maintain a constant viscosity avoiding sludge and deposits in the crankcase, anti-wear properties and dispersant power, and fuel economy benefits.

The MB 229.3 standard is more stringent than the 229.1 in terms of aging resistance (extended drain interval: on board computer) and Fuel Economy performance: 1.2% Fuel Economy improvement compare to a 15W-40 oil reference. The MB 229.3 standard applies for most of MERCEDES Gasoline engines and the majority of MERCEDES Diesel engines without DPF (Diesel Particulate Filter).

RENAULT has developed RN0700 standard for oils able to provide a high thermal stability and insure an outstanding resistance at high temperatures.
In general, RN0700 standard applies for all Naturally Aspirated Gasoline engines (except Renault Sport) of RENAULT Group (RENAULT, DACIA and SAMSUNG). The RN0700 standard applies also to all RENAULT vehicles fitted with Diesel engine 1.5 dCi without DPF < 100 HP with oil drain interval of 20 000 km or 1 year. Before use, always refer to the owner manual or handbook of the vehicle.

PSA for its B71 2300 norm requires oil to be able to endure the most severe thermal constrains in order to lubricate some of their Gasoline engines and some Diesel engines without DPF.

The reinforced synthetic Technosynthese® base stock provides very high lubricating power which reduces frictions, decreases the volatility and ensures resistance to very high temperatures reached in modern engines.
The viscosity grade SAE 10W-40 is fully suitable for recent Gasoline and Diesel engines.
Anti-oxidation, Anti-wear, Anti-corrosion, Anti-foam properties.

Drain interval: according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral oils.
Before use or if in doubt, always refer to the owner manual or handbook of the vehicle.