MOTUL DOT 3&4
102718
Pojemność
ZastosowaniePłyny hamulcowe
Rodzaj produktuDOT
JakośćFULL SYNTHETIC
Opis
W pełni syntetyczny płyn do systemów hamulcowych na bazie poliglikolu. Zalecany do hamulców tarczowych i bębnowych.
100% Synthetic Brake Fluid
W pełni syntetyczny płyn do systemów hamulcowych na bazie poliglikolu. Zalecany do hamulców tarczowych i bębnowych.
Klasa jakości: FMVSS 116 DOT 3 i DOT 4, SAE J 1703
Klasa jakości: FMVSS 116 DOT 3 i DOT 4, SAE J 1703
Very good thermal resistance and stability:
MOTUL DOT 3&4 typical dry boiling point (245°C / 473°F) is superior than the requirements of the standards DOT 3 (205°C mini / 401°F mini) and DOT 4 (230°C mini / 466°F mini), and therefore enables effective braking even under extreme conditions.
Security:
MOTUL DOT 3&4 typical wet boiling point (158°C / 316°F) is superior than the requirements of the standards DOT 3 (140°C mini / 284°F mini) and DOT 4 (155°C mini / 311°F mini), and therefore enables longer use of the product.
Indeed, DOT 3, DOT 4 or DOT 5.1 brake fluids have the property of absorbing moisture from the air, which reduces their boiling points and therefore braking safety.
The wet boiling point is measured after moistening the product with 3% water in order to be representative of the state of the fluid after 1 year of use.
Perfectly neutral with seals used in braking systems. Anti-corrosion.
MOTUL DOT 3&4 typical dry boiling point (245°C / 473°F) is superior than the requirements of the standards DOT 3 (205°C mini / 401°F mini) and DOT 4 (230°C mini / 466°F mini), and therefore enables effective braking even under extreme conditions.
Security:
MOTUL DOT 3&4 typical wet boiling point (158°C / 316°F) is superior than the requirements of the standards DOT 3 (140°C mini / 284°F mini) and DOT 4 (155°C mini / 311°F mini), and therefore enables longer use of the product.
Indeed, DOT 3, DOT 4 or DOT 5.1 brake fluids have the property of absorbing moisture from the air, which reduces their boiling points and therefore braking safety.
The wet boiling point is measured after moistening the product with 3% water in order to be representative of the state of the fluid after 1 year of use.
Perfectly neutral with seals used in braking systems. Anti-corrosion.
Oil changes: 12 to 24 months according to the manufacturers' recommendations.
For safety advice, draining once a year is recommended.
Mixable with DOT 3, DOT 4 and DOT 5.1 NON-SILICONE BASE products.
Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).
Store brake fluid in its original container, tightly closed to avoid absorption of moisture.
Aggressive chemical product if contact with hands, paint or varnish.
In case of skin contact, rinse thoroughly with water.
For safety advice, draining once a year is recommended.
Mixable with DOT 3, DOT 4 and DOT 5.1 NON-SILICONE BASE products.
Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).
Store brake fluid in its original container, tightly closed to avoid absorption of moisture.
Aggressive chemical product if contact with hands, paint or varnish.
In case of skin contact, rinse thoroughly with water.
